Reasons to choose Agritrend tractor frame mounted 3-point linkage chain harrows :
-
This is a British designed chain harrow range to be proud of. Agritrend harrows are the heaviest and most aggressive design available in Europe
-
8mm steel profiles are used on the frame mount in place of the 6mm commonplace industry standard
-
The harrow teeth weigh 455 grams more, compared to the next best chain harrow competitor product. They last longer and work harder and have superior shatter resistance.
-
The harrow teeth are double sided. One side for levelling poached and rutted pasture and spreading dung and molehills where the stub teeth are 2.5mm longer than the next best competitor. The other side with longer teeth is used to tear out thatch and tickle in seeds or to cultivate ploughed land.
-
Extra metal is used on the parts of the tooth most sensitive to wear, most notably the eyelets on each tooth. This extends working life by years.
-
The 3-point linkage headstock is more robust because we have generously engineered it with heavy steel profiles.
-
On the smaller models, both Cat I and Cat II 3-point linkage are available enabling micro and small tractor owners to harrow aggressively.
-
The strength strap bands used have 14mm thickness in place of the 12mm industry standard.
-
On all models, the wings have very heavy duty double knuckle joints where the wings fold safely giving longer life and forgiving operator error.
-
The rings which hold the tooth mat together are 14mm thickness in place of the industry standard 12mm.
-
The harrows come with robust snow board type skids with 8mm metal thickness.
-
Hooks and D-shackles used to secure the chain mat inside the frame are heavier to match the overall heavy build.
-
Hydraulic folding is standard (not an option) on the larger 4, 5 and 6m harrows. This is essential to give ease of use for operators of this heavier design.
-
Symmetry and welding is to a very high standard.
-
Agritrend staff are available on the phone 7 days per week for support, advice and spares.
Mixer buckets are suitable for skid steer, excavators, tele-handlers, back-hoe loaders and loading shovels.
-
Bucket sides are 12mm with back, front and bottom 8mm thickness.
-
Hydraulic pump specification SMT4004MDGP max pressure 180 bar max oil flow 125 I/min . Flow requirement is 50-80 I/min.
Note: The 2 meter version has twin hydraulic motors. -
Spiral auger made from abrasion resistant steel with profile 16mm X 22mm. Churns to the centre for efficient mixing.
-
The mixers have a hydraulic chain drive which is generously engineered for long life and reliability.
-
Comes with hoses and electric cab control with 1.5m pouring tube. A solenoid operated valve block provides full mixing and pouring functions on a single double acting hydraulic circuit.
-
Choice of bolt on or weld on Brackets. (POA)
-
Optional pouring chute ( see below)